Get Pricing
Titanium recycling turns offcuts back into aerospace alloy
Titanium combines high strength, low weight and corrosion resistance, so it is used in aircraft frames and engines, medical implants, chemical plant equipment and marine parts. Machining a titanium part can turn most of the starting billet into chips, and fabrication, forging and teardown add solids and sheet. Clean, graded titanium scrap goes back into melting as a direct replacement for sponge, cutting energy and cost.
FORMS WE BUY
Titanium scrap we buy
Ti-6Al-4V solids
Grade 5 bar, plate, forgings and offcuts
CP titanium
Grade 1 to 4 sheet, tube and plate
Titanium turnings
Grade 2 and grade 5 chips, clean or oily
Aerospace titanium parts
Fan blades, discs, cases and airframe parts
Titanium anodes and mesh
Uncoated mesh, baskets and heat exchanger tube
Sponge and fines
Titanium sponge fines, powder and off-spec material
HOW minor metals are PRICED
Oryx Metals makes scrap recycling easy and profitable
Highest value
Clean, high-purity solids
Uncontaminated pieces, offcuts, ingots and production rejects
Mid-Range
Coated or alloyed scrap
Coated parts, alloys, turnings and mixed solids
Priced on content
Powders, sludges & residues
Value depends on metal %, contamination and moisture
Get pricing for your metal
A photo and an analysis is all we need to start. A metals specialist replies within 24 hours.
01
Send us the material
02
we evaluate it
03
you receive an offer
04
we handle the execution
Prefer chat?
Turbine Parts for Mutilation
Tungsten Recycling
Germanium Recycling
Gallium Recycling
Indium Recycling
Hafnium Recycling
Rhenium Recycling
Tantalum Recycling
Niobium Recycling
Tin Recycling
Molybdenum Recycling
Vanadium Recycling
Zirconium Recycling
Tungsten Carbide Scrap
Nickel Alloys
Cobalt Alloys
Titanium Alloys
High Speed Steel
Jet Engine & Turbine Blade Scrap
Rare Earth & Magnet Scrap
Battery Black Mass
Tungsten Catalyst
Molybdenum Catalyst
Copper Catalyst
Vanadium Catalyst
Mixed-Metal Catalyst
Precious Metal (PGM) Catalyst
Gold (Au)
Silver (Ag)
Platinum (Pt)
Palladium (Pd)
Rhodium (Rh)
Iridium (Ir)
Ruthenium (Ru)
Metal-Bearing Sludges
Mixed Metal Residues
Filter Cakes
Sweeps
Dusts
Fines
Slags
Tantalum & Niobium (ores)
Tungsten (ores)
Tin (ores)
Titanium (ores)
Rare Earth (ores)
MATERIAL WE’ve BOUGHT
Does your material look like this?
FAQs
Titanium recycling and titanium scrap price FAQ
What titanium scrap do you buy for titanium recycling?
Ti-6Al-4V (grade 5) and other alloy solids, CP titanium sheet, tube and plate, turnings, aerospace parts such as fan blades, discs and cases, uncoated mesh, baskets and heat exchanger tube, and titanium sponge fines and powder.
How do I know which titanium grade I have?
Mill certificates or part numbers are the easiest route. Otherwise an XRF reading separates CP titanium from grade 5 and other alloys. Titanium is light, non-magnetic and throws bright white sparks when ground.
What drives the titanium scrap price?
The grade, the form and how clean the material is. Solid, sorted grade 5 or CP titanium earns the most, while mixed or oily turnings and material with tool inserts, steel or coatings are worth less. The titanium scrap value also moves with demand from melters. Oryx makes each offer from your grade and analysis.
Why do melters care about carbide or steel in titanium turnings?
Small pieces of carbide tooling or steel can cause hard inclusions in remelted titanium, which is unacceptable in aerospace alloy. Turnings with contamination have to be cleaned or go to lower-value uses, so separating them at the machine keeps your titanium scrap at its best price.
How does an aerospace shop or scrap yard sell titanium to Oryx?
Send grades, weights and photos by email, WhatsApp or WeChat. We send a written offer, agree collection, verify grade and weight at arrival and pay by wire. Regular sellers can agree a pricing basis for ongoing loads.
Why choose Oryx Metals as your titanium recycler?
Oryx Metals sorts titanium by grade and cleanliness instead of buying it as one mixed lot, so clean grade 5 is paid as grade 5. We work directly with melters that use scrap as feedstock, handle the logistics and give you a clear written offer every time.
